Milling Machine Series
CNC operations
156
Advantech-LNC Technology Co., Ltd.
As for system parameters, the 【Parameters】 key on the human machine page should be pressed to enter the
system parameter setup page, and its setting method is identical to user parameters.
If the position in front of a parameter number is blank, it means that the parameter will take effect immediately
after setting is complete; if there is an R in front of the parameter number, it means that the parameter will take
effect by pressing the <RESET> key after setting is complete; if there is a ⊙ in front of the parameter number,
it means that the parameter will take effect after system reboot.
To Next Page
Loading...
Need help?
General
