GPIB OPERATION
3-2-33
:VALUE?
Prepares message containing information on the current LF
generator level marker settings in the following format:
:SWEEP:LFGL:MKRNUM <nr1>;VALUE <nr2>;<status>
where: <status> is a program mnemonic indicating whethe
the selected Marker is ON or OFF.
Sample response:
:SWEEP:LFGL:MKRNUM 2;VALUE 5.0;MKRON
:INTF?
Prepares message containing information on Modulation
Oscillator Frequency Sweep settings in the following format:
:SWEEP:INTF:START <nr2>;STOP <nr2>;STEP <nr1>;TIME <nr1>
Sample response:
:SWEEP:INTF:START 270.0;STOP 3300.0;STEP 500;TIME 1
:VALUE?
Prepares message containing information on the current
modulation oscillator frequency marker settings in the
following format:
:SWEEP:INTF:MKRNUM <nr1>;VALUE <nr2>;<status>
where: <status> is a program mnemonic indicating whethe
the selected Marker is ON or OFF.
Sample response:
:SWEEP:INTF:
MKRNUM 2;VALUE 2900.0;MKRON
:HOP?
Prepares message containing information on Frequency
Hopping Sweep in the following format:
:SWEEP:HOP:TIME<nr1>
To Next Page
Loading...
Need help?
General
