Agilent Technologies 1200 series Reference Manual

Agilent 1200 Series Autosampler Reference Manual 25
Installing the Autosampler 1
Installing the Autosampler
Preparation Locate bench space
Provide power connection
Unpack the Sampler
Parts required Sampler
Power cord, for the other cables see below and “Cable Overview” on page 200
Chemstation and/or Control Module G1323B.
WARNING
To avoid personal injury, keep fingers away from the needle area during autosampler
operation. Do not bend the safety flap away from its position, or attempt to remove
the safety cover (see Figure 5). Do not attempt to insert or remove a vial from the
gripper when the gripper is positioned below the needle.
Figure 5 Safety Flap
Safety flap
Safety cover

Agilent Technologies 1200 series Specifications

General

Brand	Agilent Technologies
Model	1200 series
Category	Laboratory Equipment
Language	English