Agilent Technologies 83620B

SCPI COMMAND SUMMARY
Table S-1. 8360 SCPI COMMAND SUMMARY (continued)
Command Parameters Parameter Type
1
Allowed Values
:FM
:SOURce FM source discrete INTernal j EXTernal
:STATe state Bo olean ON j OFF j 1 j 0
:FREQuency
:CENTer center freq extended numeric sp ecied freq range
or MAXimum j MINimum j UP j DOWN
[:CW] CW freq extended numeric sp ecied freq range
or MAXimum j MINimum j UP j DOWN
:AUTO coupled to center freq Bo olean ON j OFF j 1 j 0
:MANual manual freq extended numeric start/stop limits
or MAXimum j MINimum j UP j DOWN
:MODE free mo de discrete CW j SWEep j LIST
:MULTiplier freq mult extended numeric +36 to 0 36
or MAXimum j MINimum
:STATe state Bo olean ON j OFF j 1 j 0
:OFFSet freq oset extended numeric +99.999 to 0 99.999 GHz
or MAXimum j MINimum
:STATe state Bo olean ON j OFF j 1 j 0
:SPAN freq span extended numeric 0 to MAX-MIN
or MAXimum j MINimum j UP j DOWN
:STARt start freq extended numeric sp ecied freq range
or MAXimum j MINimum j UP j DOWN
:STEP
:AUTO auto freq step Bo olean ON j OFF j 1 j 0
[:INCRement] freq step extended numeric range or
MAXimum j MINimum
:STOP stop freq extended numeric sp ecied freq range or
MAXimum j MINimum j UP j DOWN
:INITiate
:CONTinuous cont sweep Bo olean ON j OFF j 1 j 0
[:IMMediate] sweep immediately
:LIST
:DWELl dwell time extended numeric f 0.1 to 3200 ms g *801 or
f MAXimum j MINimum g 1*801
:POINts?
:FREQuency list freq extended numeric f sp ecied freq range g *801 or
f MAXimum j MINimum g 1*801
:POINts num of freq p oints extended numeric [MAXimum j MINimum]
Operating and Programming Reference S-21