PREFACE
This manual provides user information for the AgilentTechnologies
8360 B-Series swept signal generator.
Instruments Covered
By This Manual
This manual applies to instruments having a serial number prex
listed on the title page (behind the \Do cumentation Map" tab).
Some changes mayhave to be made to this manual so that it
applies directly to each instrument; refer to Chapter 5, \Instrument
History", to see what changes may apply to your instrument.
A serial numb er lab el ( Figure 0-1) is attached to the instrument's
rear panel. A prex (four digits followed by a letter), and a sux
(ve digits unique to each instrument), comprise the instrument
serial number.
Figure 0-1.
Typical Serial Number Label
User's Guide
Organization
Tabs divide the ma jor chapters of this manual. The contents of each
chapter is listed in the Table of Contents.
Agilent
Technologies 8360
B-Series
Documentation
Do cumentation Map
For a pictorial representation of the AgilentTechnologies
8360 B-Series do cumentation, see the
\Documentation Map"
at the
front of this manual.
Ordering Manuals
A manual part number is listed on the title page of this manual. You
may use it to order extra copies of this manual. See
\Replaceable
Parts"
in
Agilent Technologies 8360 B-Series Swept Signal
Generator/8360 L-Series Swept CW Generator Service Guide
for
a complete list of AgilentTechnologies 8360 do cumentation and
ordering numbers.
vii
To Next Page
Loading...
Need help?
General
