Agilent Technologies 8860 Maintaining

8 Maintaining the COC Inlet
To Change a Septum on the COC Inlet
Maintaining Your GC 129
4 Before making an injection, check the alignment of the entire assembly using the proper
size syringe.
5 The GC maintenance wizard will perform checks at the appropriate times, including Leak &
Restriction tests, and will automatically reset the maintenance counters.
6 Select Finished, then select OK to exit the GC maintenance wizard.
7 Restore the analytical method.
For manual 200-µm injections with
fused silica needle

Agilent Technologies 8860 Specifications

General

Brand	Agilent Technologies
Model	8860
Category	Laboratory Equipment
Language	English