To Next Page

To Previous Page

5 Maintaining the Split/Splitless Inlet

Consumables and Parts for the Split/Splitless Inlet

42 Maintaining Your GC

Consumables and Parts for the Split/Splitless Inlet

See the Agilent catalog for consumables and supplies for a more complete listing, or visit the

Agilent Web site for the latest information (www.agilent.com/chem/supplies).

Table 5 Split, splitless, direct, and direct connect inlet liners

Mode Description Deactivated Part number

Split Low-pressure drop, glass wool, single taper, 870 µL Yes 5183-4647

Split Glass wool, 990 µL No 19251-60540

Split MS Certified, single taper, glass wool Yes 5188-6576

Split—Manual only Empty pin and cup, 800 µL No 18740-80190

Split—Manual only Packed pin and cup, 800 µL No 18740-60840

Split or splitless Ultra Inert, low pressure drop, glass wool Yes 5190-2295

Splitless Single taper, glass wool, 900 µL Yes 5062-3587

Splitless Single taper, no glass wool, 900 µL Yes 5181-3316

Splitless Dual taper, no glass wool, 800 µL Yes 5181-3315

Splitless MS Certified, single taper, glass wool Yes 5188-6568

Splitless—Direct inject 2-mm id, quartz, 250 µL No 18740-80220

Splitless—Direct inject 2-mm id, 250 µL Yes 5181-8818

Direct inject —Headspace or purge

and trap

1.5-mm id, 140 µL No 18740-80200

Direct column connect Single taper, splitless 4-mm id Yes G1544-80730

Direct column connect Dual taper, splitless 4-mm id Yes G1544-80700

Table 6 Nuts, ferrules, and hardware for capillary columns

Column id (mm) Description Typical use Part number/quantity

.530 Ferrule, Vespel/graphite, 0.8-mm id 0.45-mm and 0.53-mm capillary columns 5062-3512 (10/pk)

Ferrule, graphite, 1.0-mm id 0.53-mm capillary columns 5080-8773 (10/pk)

Ferrule, graphite, 0.8-mm id 0.53-mm capillary columns 500-2118 (10/pk)

Column nut, finger-tight (for

0.53-mm columns)

Connect column to inlet or detector 5020-8293

.320 Ferrule, Vespel/graphite, 0.5-mm id 0.32-mm capillary columns 5062-3514 (10/pk)

Ferrule, graphite, 0.5-mm id 0.1-mm, 0.2-mm, 0.25-mm, and 0.32-mm

capillary columns

5080-8853 (10/pk)

Column nut, finger-tight (for .100- to

.320-mm columns)

Connect column to inlet or detector 5020-8292

Agilent Technologies 8860 Maintaining

Other manuals for Agilent Technologies 8860