Agilent Technologies 8860 Maintaining

6 Maintaining the Purged Packed Inlet
Consumables and Parts for the Purged Packed Inlet
66 Maintaining Your GC
Consumables and Parts for the Purged Packed
Inlet
See the Agilent catalog for consumables and supplies for a more complete listing, or visit the
Agilent Web site for the latest information (www.agilent.com/chem/supplies).
Table 8 Purged packed inlet parts
Description Part number/quantity
Preventative maintenance kit 5188-6498
Purged packed glass liners and column adapters
Glass liner 5080-8732 (25/pack) or
5181-3382 deactivated (5/pack)
0.53-mm column adapter 19244-80540
1/8-inch column adapter 19243-80530
1/4-inch column adapter 19243-80540
Recommended septa and O-rings for the purged packed inlet
11-mm solid septum, low-bleed, red 5181-1263 (50/pk)
11-mm septum with partial through-hole, low-bleed, red 5181-3383 (50/pk)
11-mm septum, low-bleed, gray 5080-8896 (50/pk)
Merlin Microseal septum (30 psi) 5181-8815
11-mm high-temperature silicone septum (350 °C and higher) 5182-0739 (50/pk)
Viton O-ring (Top insert weldment) 5080-8898 (12/pk)
Packed column adapters for detectors
1/8-inch Packed column adapter assembly G3435-81340
1/4-inch Packed column adapter assembly G3435-81330
Table 9 Nuts and ferrules for packed columns
Description Typical use Part number/quantity
1/8-inch id Swagelok stainless steel nut, front ferrule,
back ferrule
1/8-inch column 5080-8751 (20 each/pk)
1/8-inch id Swagelok brass nut, front ferrule, back
ferrule
1/8-inch column 5080-8750 (20 each/pk)
1/8-inch id Vespel/ graphite ferrule 1/8-inch column 0100-1332 (10/pk)
1/8-inch id
brass tubing nut
1/8-inch column 5180-4103 (10/pk)
1/4-inch id Swagelok stainless steel nut, front ferrule,
back ferrule
1/4-inch column 5080-8753 (20 each/pk)

Agilent Technologies 8860 Specifications

General

Brand	Agilent Technologies
Model	8860
Category	Laboratory Equipment
Language	English