Maintaining Your GC 5
To Install a Packed Column Adapter on a Detector Fitting 113
To Install a Packed Glass Column 115
To Condition a Packed Column 117
To Install Ferrules on a Packed Metal Column 118
8 Maintaining the COC Inlet
Consumables and Parts for the Cool On-Column Inlet 120
Exploded Parts View of the Cool On-Column Inlet 123
To Install a Capillary Column with the Cool On-Column Inlet 124
To Check the Needle-to-Column Size on the COC Inlet 127
To Change a Septum on the COC Inlet 128
To Install an Insert on the COC Inlet 130
To Clean the COC Inlet 132
To Replace the 7693A Injector Needle Support Guide 134
To Replace a Needle in a Syringe 135
To Replace the Fused Silica Needle in a Syringe for the COC Inlet 136
To Bakeout Contaminants from the COC Inlet 137
9 Maintaining the FID
Consumables and Parts for the FID 140
Exploded Parts Views of the Flame Ionization Detector 142
To Install a Capillary Column in the FID 144
To Replace an FID Jet 147
To Perform Maintenance on the FID Collector Assembly 150
To Check the FID Leakage Current 158
To Check the FID Baseline 159
To Install the Optional FID PTFE Chimney Insert 160
To Bakeout the FID 161
10 Maintaining the TCD
Consumables and Parts for the Thermal Conductivity Detector 164
To Install a Capillary Column in the TCD 166
To Bakeout Contaminants from the TCD 169
To Next Page
Loading...
Need help?
General
