Chapter 4 73
Troubleshooting
Troubleshooting Using Diagnostics Test
4. Troubleshooting
NOTE The meaning of abbreviations are shown in Table 4-4.
NOTE Module configulation is shown Figure 4-13 for 2-port, and Figure 4-15 for 4-port.
Figure 4-13 Module configulation for 2-port
Slot 2: Synthesizer Module for Source
Slot 3: Synthesizer Module for Local
Slot 6: Receiver Module for Port 1
Slot 9: Receiver Module for Port 2
Table 4-4 The meaning of abbreviations
Abbreviation Meaning (Description)
BAS Analog Base Board
SRC TESTED Synthesizer Module (Source)
LCL TESTED Synthesizer Module (Local)
DBL TESTED Doubler Module (For over 8.5 GHz Options)
VNR TESTED Level Vervier Module
RCV TESTED Receiver Module
IMX IMIX (For over 8.5 GHz Options)
FEM Front End Module (For over 8.5 GHz Options)