Agilent Technologies InfiniiVision 2000 X-Series User Manual

Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide 11
To reset the label library to the factory default 111
9Triggers
Adjusting the Trigger Level 114
Forcing a Trigger 115
Edge Trigger 115
Pattern Trigger 118
Hex Bus Pattern Trigger 120
Pulse Width Trigger 121
Video Trigger 123
To trigger on a specific line of video 127
To trigger on all sync pulses 128
To trigger on a specific field of the video signal 129
To trigger on all fields of the video signal 130
To trigger on odd or even fields 131
10 Trigger Mode/Coupling
To select the Auto or Normal trigger mode 136
To select the trigger coupling 138
To enable or disable trigger noise rejection 139
To enable or disable trigger HF Reject 139
To set the trigger holdoff 140
External Trigger Input 140
Maximum voltage at oscilloscope external trigger input 141
11 Acquisition Control
Running, Stopping, and Making Single Acquisitions (Run
Control) 143

Agilent Technologies InfiniiVision 2000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 2000 X-Series
Category	Test Equipment
Language	English