Agilent Technologies InfiniiVision 2000 X-Series User Manual

80 Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
5 Reference Waveforms
1 Display the desired reference waveform (see "To display a reference
waveform" on page 78).
2 Press the Skew softkey and turn the Entry knob to adjust the reference
waveform skew.
To display reference waveform information
1 Press the [Ref] key to turn on reference waveforms.
2 In the Reference Waveform Menu, press the Options softkey.
3 In the Reference Waveform Options Menu, press the Display Info softkey
to enable or disable reference waveform information on the oscilloscope
display.
4 Press the Tr ans paren t softkey to enable or disable transparent
information backgrounds.
This setting is also used for other oscilloscope information on the
display, like mask test statistics, etc.
To save/recall reference waveform files to/from a USB storage device
Analog channel, math, or reference waveforms can be saved to a reference
waveform file on a USB storage device. See "To save reference waveform
files to a USB storage device" on page 225.
You can recall a reference waveform file from a USB storage device into
one of the reference waveform locations. See "To recall reference waveform
files from a USB storage device" on page 228.

Agilent Technologies InfiniiVision 2000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 2000 X-Series
Category	Test Equipment
Language	English