130 Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
9 Triggers
To trigger on all fields of the video signal
To quickly and easily view transitions between fields, or to find the
amplitude differences between the fields, use the All Fields trigger mode.
1 Press the [Trigger] key.
2 In the Trigger Menu, press the Trigger softkey; then, turn the Entry knob
to select Video.
3 Press the Settings softkey, then press the Standard softkey to select the
appropriate TV standard.
4 Press the Mode softkey and select All Fields.
Figure 17 Triggering on Field 1
To Next Page
Loading...
