Agilent Technologies InfiniiVision 2000 X-Series User Manual

Reference Waveforms 5
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide 79
One reference waveform can be displayed at a time.
See Also • "To display reference waveform information" on page 80
To scale and position reference waveforms
1 Make sure the multiplexed scale and position knobs to the right of the
[Ref] key are selected for the reference waveform.
If the arrow to the left of the [Ref] key is not illuminated, press the key.
2 Turn the upper multiplexed knob to adjust the reference waveform
scale.
3 Turn the lower multiplexed knob to adjust the reference waveform
position.
To adjust reference waveform skew
Once reference waveforms are displayed, you can adjust their skew.

Agilent Technologies InfiniiVision 2000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 2000 X-Series
Category	Test Equipment
Language	English