Reference 21
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide 277
Differential Probes
The following differential probes can be used with the InfiniiVision
2000 X-Series oscilloscopes.
Current Probes
The following current probes can be used with the InfiniiVision
2000 X-Series oscilloscopes.
N2771A/B Passive probe, 1000:1, 30 kV, 50 MHz
N2862A/B Passive probe, 10:1, 150 MHz, 1.2 m
N2863A/B Passive probe, 10:1, 300 MHz, 1.2 m
N2889A Passive probe, 10:1/1:1, 350 MHz, 1.2 m
N2890A Passive probe, 10:1, 500 MHz, 1.2 m
Table 6 Passive Probes (continued)
Model Description
Table 7 Differential Probes
Model Description
1141A Active differential probe, 200 MHz, 200 VDC + peak AC max (requires
1142A power supply)
1144A Active probe, 800 MHz (requires 1142A power supply)
1145A Active probe, 750 MHz 2-ch (requires 1142A power supply)
N2772A Active differential probe, 20 MHz, 1.2 kVDC + peak AC max (requires
N2773A power supply)
N2791A High-voltage differential probe, 25 MHz, +/-700 V, 1 MOhm termination,
10:1 or 100:1 (switchable)
N2792A Differential probe, 200 MHz 10:1, 50 Ohm termination
N2793A Differential probe, 800 MHz 10:1, +/-15 V, 50 Ohm termination
To Next Page
Loading...
