Math Waveforms 4
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide 67
See Also • "Units for Math Waveforms" on page 65
Multiply or Divide
When you select the multiply or divide math function, the Source 1 and
Source 2 values are multiplied or divided point by point, and the result is
displayed.
The divide by zero case places holes (that is, zero values) in the output
waveform.
Multiply is useful for seeing power relationships when one of the channels
is proportional to the current.
Figure 5 Example of Subtract Channel 2 from Channel 1
To Next Page
Loading...
