Web Interface 20
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide 265
Information about controlling the oscilloscope through remote commands
is contained in the Programmer's Guide, which is included on the
documentation CD supplied with this oscilloscope. You can also access this
document on the Agilent web site.
For more information about connecting to the oscilloscope, refer to the
Agilent Technologies USB/LAN/GPIB Interfaces Connectivity Guide. For a
printable electronic copy of the Connectivity Guide, direct your Web
browser to "www.agilent.com" and search for "Connectivity Guide".
Save/Recall
You can save setup files, screen images, waveform data files, or mask files
to your PC via the oscilloscope's web interface (see "Saving Files via the
Web Interface" on page 265).
You can recall setup files, reference waveform data files, or mask files
from your PC via the oscilloscope's web interface (see "Recalling Files via
the Web Interface" on page 266).
Saving Files via the Web Interface
To save setup files, screen images, waveform data files, or mask files to
your PC via the oscilloscope's web interface:
1 Access the oscilloscope's web interface (see "Accessing the Web
Interface" on page 258).
2 When the oscilloscope's web interface is displayed, select the Save/Recall
tab from the left side of the Welcome screen.
3 Click the Save link.
4 On the Save page:
a Enter the name of the file you are saving to.
b Select the format.
To Next Page
Loading...
