Agilent Technologies InfiniiVision 2000 X-Series User Manual

Save/Recall (Setups, Screens, Data) 17
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide 227
When available, the Increment softkey can be used to enable or disable
automatically incremented file names. Auto increment adds a numeric
suffix to your file name and increments the number with each
successive save. It will truncate characters as necessary when the file
name length is at maximum and more digits are required for the
numeric portion of the file name.
Recalling Setups, Masks, or Reference Waveforms
1 Press the [Save/Recall] key.
2 In the Save/Recall Menu, press Recall.
3 In the Recall Menu, press Recall:, then, turn the Entry knob to select
the type of file you want to recall:
• Setup (*.scp) — See "To recall setup files" on page 227.
• Mask (*.msk) — See "To recall mask files" on page 228.
• Reference Waveform data (*.h5) — See "To recall reference waveform files
from a USB storage device" on page 228.
You can also recall setups and mask files by loading them using the File
Explorer. See "File Explorer" on page 241.
You can also configure the [Quick Action] key to recall setups, masks, or
reference waveforms. See "Configuring the [Quick Action] Key" on
page 253.
To recall setup files
Setup files can be recalled from one of 10 internal (\Agilent Flash)
locations or from an external USB storage device.
1 Press [Save/Recall] > Recall > Recall:; then, turn the Entry knob to select
Setup (*.scp).
NOTE
You can use a connected USB keyboard instead of using the Spell (and other) character
editing softkeys.

Agilent Technologies InfiniiVision 2000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 2000 X-Series
Category	Test Equipment
Language	English