Print (Screens) 18
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide 233
2 In the Print Configuration Menu, press the Print to softkey; then, turn
the Entry knob to select the network printer you want to configure
(either #0 or #1).
3 Press the Network Setup softkey.
4 In the Network Printer Setup Menu, press the Modify softkey; then, turn
the Entry knob to select the network parameter you want to enter.
The setting that must be entered is:
• Printer Address — this is the printer or print server's address in one of
the following formats:
• IP address of a network- enabled printer (for example:
192.168.1.100 or 192.168.1.100:650). Optionally, a non-standard
port number can be specified following a colon.
• IP address of a print server followed by the path to the printer
(for example: 192.168.1.100/printers/printer- name or
192.168.1.100:650/printers/printer- name).
• Path to a Windows network printer share (for example: \\server\
share).
When the Printer Address is a Windows network printer share, the
Modify softkey also lets you enter these settings:
• Network Domain — this is the Windows network domain name.
• Username — this is your login name for the Windows network domain.
• Password — this is your login password for the Windows network
domain.
To clear an entered password, press the Clear Password softkey.
5 Use the Spell, Enter, and Delete Character softkeys to enter the network
printer settings:
• Spell — press this softkey and turn the entry knob to select the
character at the current position.
• Enter — press this softkey to enter characters and move the cursor to
the next character position.
• Delete Character — press the Enter softkey until the desired character is
highlighted; then, press this softkey to delete the character.
To Next Page
Loading...
Need help?
General
