Akuvox R20B Series User Manual

16
R20B
Admin Guide
to enrich your personalized user experience.
5.2.6.1. Volume Configuration
To set up the volumes, you can start with the following process:
1. Click Phone - Voice.
2. Enter the volume value in Volume field ,1 is minimum, 15 is maximum.
3. Click submit Tab for confirmation.
Parameters Set-up:
 Mic Volume: Adjust the mic volume as needed.
 Speaker Volume: Adjust the speaker volume as needed.
 Tamp Alarm Volume: Adjust the volume for the tamper alarm.
 Ringback volume: Adjust the volume for the ringback tone.
5.2.6.2. Open Door Tone Configuration
You can not only enable or disable the Open Door Tone but also controls the
prompt words that accompanies the tone.

Akuvox R20B Series Specifications

General

Brand	Akuvox
Model	R20B Series
Category	Intercom System
Language	English