default DHCP mode and static IP connection for the device on the device web
interface.
5.3.1.1. Network Status
To check the network status on the web interface, you can do as follows:
1. Click Status to find Network Information.
2. Check for the network information for the device.
Parameters Set-up:
DHCP: Select the DHCP mode (Dynamic Host Configuration Protocol)
by checking the DHCP box. DHCP mode is the default network connection.
If the DHCP mode is selected, then the door phone will be assigned by the
DHCP server with IP address, subnet mask,default gateway,and DNS
servers address automatically.
Static IP: Select the Static IP mode (Internet Protocol) by checking off
the DHCP square box. When static IP mode is selected, then the IP
address, subnet mask,default gateway,and DNS servers address have to
be manually configured according to your actual network environment.
IP Address: Set up the IP Address if the static IP mode is selected
Default Gateway: set up the correct gateway default gateway according to
your actual network environment.
LAN DNS1/DNS2: Set up DNS1/ DNS2 (Domain Name Server)according
to your actual network environment.
To Next Page
Loading...
Need help?
General
