5.15.1.1. Config File
Automatic deployment has the following applications:
General configuration provisioning: In this scenario, a general configuration
file is stored in the server and all devices download the same configuration file
to update their parameters.
MAC based configuration provisioning: In this scenario, each configuration
file is for a specific device with the MAC address that matches the file name.
The parameters in this configuration file are for that specific device only. This is
normally for the account related parameters.
If you have both of these files on the server, IP device will first get the General
configuration file first and then get the MAC based configuration file using its
MAC address as the ID.
5.15.1.2. AutoP Schedule
Akuvox provide different AutoP methods to let the device can do phone
provisioning in a fixed time.
To setup schedule, you can do as follows:
Parameters Set-up:
Power On: Device will start to do AutoP every time it boots up.
Repeatedly: Device will start to do AutoP by following the predefined
To Next Page
Loading...
Need help?
General
