Akuvox R20B Series User Manual

88
R20B
Admin Guide
Parameters set-up:
 HTTP API: select “Enable” or “ Disable “ to enable or disable the HPTT
API function for the third party integration. For example, if the function is
disable any request to initiate the integration will be denied and be
returned HTTP 403 forbidden status.
 Auth Mode: select among four options: “None” “ WhiteList” “ Basic”,
“ Digest” for authorization type, which will be explained in detail in the
following chart.
 User Name: enter the user name when “Basic” and “Digest”
authorization mode is selected. The default user name is “Admin”
 Password: enter the password when “Basic” and “Digest” authorization
mode is selected. The default user name is “hattpapi”
 IP01-IP05: enter the IP address of the third party devices when the
“WhiteList” authorization is select for the integration.

Akuvox R20B Series Specifications

General

Brand	Akuvox
Model	R20B Series
Category	Intercom System
Language	English