Alcatel-Lucent 7210 SAS M - Page 179

MPLS and RSVP
7210 SAS M, T, X, R6, Mxp MPLS Configuration Guide Page 179
202 static-lsp STATIC
-----------------------------------------------------------------
In-use labels in entire range : 5057
=================================================================
*A:SRU4>config>router>mpls#
label-range
Syntax label-range
Context show>router>mpls
Description This command displays the MPLS label range.
Output MPLS Label Range Output — The following table describes the MPLS label range output fields.
Sample Output
*A:Dut-A# show router mpls label-range
==============================================================================
Label Ranges
==============================================================================
Label Type Start Label End Label Aging Total Available
------------------------------------------------------------------------------
static-lsp 32 1023 - 992
static-svc 2048 18431 - 16384
dynamic 32768 131071 0 102400
==============================================================================
*A:Dut-A#
Label Description
Label Type
Displays the information about static-lsp, static-svc, and dynamic
label types.
Start Label
The label value assigned at the ingress router.
End Label
The label value assigned for the egress router.
Aging
The number of labels released from a service which are transitioning
back to the label pool. Labels are aged 15 seconds.
Total Available
The number of label values available.