Security
7450 ESS System Mangement Guide Page 119
LLDP Commands
lldp
Syntax lldp
Context config>system
Description This command enables the context to configure system-wide Link Layer Discovery Protocol
parameters.
message-fast-tx
Syntax message-fast-tx time
no message-fast-tx
Context config>system>lldp
Description This command configures the duration of the fast transmission period.
Parameters time — Specifies the fast transmission period in seconds.
Values 1 — 3600
Default 1
message-fast-tx-init
Syntax message-fast-tx-init count
no message-fast-tx-init
Context config>system>lldp
Description This command configures the number of LLDPDUs to send during the fast transmission period.
Parameters count — Specifies the number of LLDPDUs to send during the fast transmission period.
Values 1 — 8
Default 4
To Next Page
Loading...
