Security
7450 ESS System Mangement Guide Page 123
inbound-max-sessions
Syntax inbound-max-sessions value
no inbound-max-sessions
Context config>system>login-control>ftp
Description This command configures the maximum number of concurrent inbound FTP sessions.
This value is the combined total of inbound and outbound sessions.
The no form of the command reverts to the default value.
Default 3
Parameters value — The maximum number of concurrent FTP sessions on the node.
Values 0 — 5
inbound-max-sessions
Syntax inbound-max-sessions value
no inbound-max-sessions
Context config>system>login-control>telnet
Description This parameter limits the number of inbound Telnet and SSH sessions. A maximum of 15 telnet and
ssh connections can be established to the router. The local serial port cannot be disabled.
The no form of the command reverts to the default value.
Default 5
Parameters value — The maximum number of concurrent inbound Telnet sessions, expressed as an integer.
Values 0 — 15
login-banner
Syntax [no] login-banner
Context config>system>login-control
Description This command enables or disables the display of a login banner. The login banner contains the SR OS
copyright and build date information for a console login attempt.
The no form of the command causes only the configured pre-login-message and a generic login
prompt to display.
To Next Page
Loading...
