Login, Telnet, SSH and FTP Commands
Page 124 7450 ESS System Mangement Guide
login-control
Syntax login-control
Context config>system
Description This command creates the context to configure the session control for console, Telnet and FTP.
motd
Syntax motd {url url-prefix: source-url | text motd-text-string}
no motd
Context config>system>login-control
Description This command creates the message of the day displayed after a successful console login. Only one
message can be configured.
The no form of the command removes the message.
Default No motd is defined.
Parameters url url-prefix: source-url — When the message of the day is present as a text file, provide both url-
prefix and the source-url of the file containing the message of the day. The URL prefix can be
local or remote.
text motd-text-string — The text of the message of the day. The motd-text-string must be enclosed in
double quotes. Multiple text strings are not appended to one another.
Some special characters can be used to format the message text. The “\n” character creates multi-
line MOTDs and the “\r” character restarts at the beginning of the new line. For example, enter-
ing “\n\r” will start the string at the beginning of the new line, while entering “\n” will start the
second line below the last character from the first line.
outbound-max-sessions
Syntax outbound-max-sessions value
no outbound-max-sessions
Context config>system>login-control>telnet
Description This parameter limits the number of outbound Telnet and SSH sessions. A maximum of 15 telnet and
ssh connections can be established from the router. The local serial port cannot be disabled.
The no form of the command reverts to the default value.
Default 5
Parameters value — The maximum number of concurrent outbound Telnet sessions, expressed as an integer.
Values 0 — 15
To Next Page
Loading...
