TACACS+ Client Commands
Page 186 7450 ESS System Mangement Guide
When interactive-authentication is enabled, tacplus must be the first method specified in the authenti-
cation-order configuration.
Default no interactive-authentication
timeout
Syntax timeout seconds
no timeout
Context config>system>security>tacplus
Description This command configures the number of seconds the router waits for a response from a TACACS+
server.
The no form of the command reverts to the default value.
Default 3
Parameters seconds — The number of seconds the router waits for a response from a TACACS+ server,
expressed as a decimal integer.
Values 1 — 90
shutdown
Syntax [no] shutdown
Context config>system>security>tacplus
Description This command administratively disables the TACACS+ protocol operation. Shutting down the proto-
col does not remove or change the configuration other than the administrative state.
The operational state of the entity is disabled as well as the operational state of any entities contained
within. Many objects must be shut down before they may be deleted.
The no form of the command administratively enables the protocol which is the default state.
Default no shutdown
use-default-template
Syntax [no] use-default-template
Context config>system>security>tacplus
Description This command specifies whether or not the user template defined by this entry is to be actively
applied to the TACACS+ user.
To Next Page
Loading...
