SNMP
7450 ESS System Mangement Guide Page 303
shutdown
Syntax [no] shutdown
Context config>system>snmp>streaming
Description This command administratively disables proprietary SNMP request/response bundling and TCP-
based transport mechanism for optimizing network management of the router nodes..
The no form of the command administratively re-enables SNMP request/response bundling and TCP-
based transport mechanism.
Default shutdown
shutdown
Syntax [no] shutdown
Context config>system>snmp
Description This command administratively disables SNMP agent operations. System management can then only
be performed using the command line interface (CLI). Shutting down SNMP does not remove or
change configuration parameters other than the administrative state. This command does not prevent
the agent from sending SNMP notifications to any configured SNMP trap destinations. SNMP trap
destinations are configured under the config>log>snmp-trap-group context.
This command is automatically invoked in the event of a reboot when the processing of the
configuration file fails to complete or when an SNMP persistent index file fails while the bof persist
on command is enabled.
The no form of the command administratively enables SNMP which is the default state.
Default no shutdown
To Next Page
Loading...
