Event and Accounting Logs
7450 ESS System Mangement Guide Page 463
Configuration Commands
Generic Commands
description
Syntax description string
no description
Context config>log>filter
config>log>filte>entry
config>log>log-id
config>log>accounting-policy
config>log>event-handling>handler
config>log>event-handling>handler>action-list>entry
config>log>event-trigger>event
config>log>event-trigger>event>trigger-entry
config>log>file-id
config>log>syslog
config>log>snmp-trap-group
Description This command creates a text description stored in the configuration file for a configuration context.
The description command associates a text string with a configuration context to help identify the
content in the configuration file.
The no form of the command removes the string from the configuration.
Default No text description is associated with this configuration. The string must be entered.
Parameters string — The description can contain a string of up to 80 characters composed of printable, 7-bit
ASCII characters. If the string contains special characters (#, $, spaces, etc.), the entire string
must be enclosed within double quotes.
shutdown
Syntax [no] shutdown
Context config>log>log-id
config>log>accounting-policy
config>log>event-handling>handler
config>log>event-trigger>event
Description This command administratively disables an entity. When disabled, an entity does not change, reset, or
remove any configuration settings or statistics. The operational state of the entity is disabled as well
To Next Page
Loading...
