Event and Accounting Logs
7450 ESS System Mangement Guide Page 485
Values 0 — 23
log-prefix
Syntax log-prefix log-prefix-string
no log-prefix
Context config>log>syslog syslog-id
Description This command adds the string prepended to every syslog message sent to the syslog host.
RFC3164, The BSD syslog Protocol, allows a alphanumeric string (tag) to be prepended to the
content of every log message sent to the syslog host. This alphanumeric string can, for example, be
used to identify the node that generates the log entry. The software appends a colon (:) and a space to
the string and it is inserted in the syslog message after the date stamp and before the syslog message
content.
Only one string can be entered. If multiple strings are entered, the last string overwrites the previous
string. The alphanumeric string can contain lowercase (a-z), uppercase (A-Z) and numeric (0-9)
characters.
The no form of the command removes the log prefix string.
Default no log-prefix — no prepend log prefix string defined.
Parameters log-prefix-string — An alphanumeric string of up to 32 characters. Spaces and colons ( : ) cannot be
used in the string.
level
Syntax level syslog-level
no level
Context config>log>syslog syslog-id
Description This command configures the syslog message severity level threshold. All messages with severity
level equal to or higher than the threshold are sent to the syslog target host.
17 local1
18 local2
19 local3
20 local4
21 local5
22 local6
23 local7
Numerical Code Facility Code
To Next Page
Loading...
