Alcatel-Lucent 7450 - Page 493

Event and Accounting Logs
7450 ESS System Mangement Guide Page 493
to console
Syntax to console
Context config>log>log-id log-id
Description This command specifies a log ID destination. This parameter is mandatory when configuring a log
destination. This command instructs the events selected for the log ID to be directed to the console. If
the console is not connected, then all the entries are dropped.
The source of the data stream must be specified in the from command prior to configuring the
destination with the to command.
The to command cannot be modified or re-entered. If the destination or maximum size of an SNMP
or memory log needs to be modified, the log ID must be removed and then re-created.
Default No destination is specified.
to file
Syntax to file log-file-id
Context config>log>log-id log-id
Description This command specifies a log ID destination. This parameter is mandatory when configuring a log
destination. This command instructs the events selected for the log ID to be directed to a specified
file.
The source of the data stream must be specified in the from command prior to configuring the
destination with the to command.
The to command cannot be modified or re-entered. If the destination or maximum size of an SNMP
or memory log needs to be modified, the log ID must be removed and then re-created.
Default No destination is specified.
Parameters log-file-id — Instructs the events selected for the log ID to be directed to the log-file-id. The charac-
teristics of the log-file-id referenced here must have already been defined in the config>log>file
log-file-id context.
Values 1 — 99
to memory
Syntax to memory [size]
Context config>log>log-id log-id
Description This command specifies a log ID destination. This parameter is mandatory when configuring a log
destination. This command instructs the events selected for the log ID to be directed to a memory log.