SNMP Trap Groups
Page 494 7450 ESS System Mangement Guide
A memory file is a circular buffer. Once the file is full, each new entry replaces the oldest entry in the
log.
The source of the data stream must be specified in the from command prior to configuring the
destination with the to command.
The to command cannot be modified or re-entered. If the destination or maximum size of an SNMP
or memory log needs to be modified, the log ID must be removed and then re-created.
Default none
Parameters size — The size parameter indicates the number of events that can be stored in the memory.
Default 100
Values 50 — 1024
to session
Syntax to session
Context config>log>log-id log-id
Description This command specifies a log ID destination. This parameter is mandatory when configuring a log
destination. This command instructs the events selected for the log ID to be directed to the current
console or telnet session. This command is only valid for the duration of the session. When the
session is terminated the “to session” configuration is removed. A log ID with a session destination is
saved in the configuration file but the “to session” part is not stored.
The source of the data stream must be specified in the from command prior to configuring the
destination with the to command.
The to command cannot be modified or re-entered. If the destination or maximum size of an SNMP
or memory log needs to be modified, the log ID must be removed and then re-created.
Default none
to snmp
Syntax to snmp [size]
Context config>log>log-id log-id
Description This is one of the commands used to specify the log ID destination. This parameter is mandatory
when configuring a log destination. This command instructs the alarms and traps to be directed to the
snmp-trap-group associated with log-id.
A local circular memory log is always maintained for SNMP notifications sent to the specified snmp-
trap-group for the log-id.
The source of the data stream must be specified in the from command prior to configuring the
destination with the to command.
To Next Page
Loading...
