Event and Accounting Logs
7450 ESS System Mangement Guide Page 537
Sample Output
A:ALA-1# show log log-collector
===============================================================================
Log Collectors
===============================================================================
Main Logged : 1224 Dropped : 0
Dest Log Id: 99 Filter Id: 0 Status: enabled Dest Type: memory
Dest Log Id: 100 Filter Id: 1001 Status: enabled Dest Type: memory
Security Logged : 3 Dropped : 0
Change Logged : 3896 Dropped : 0
Debug Logged : 0 Dropped : 0
===============================================================================
A:ALA-1#
log-id
Syntax log-id [log-id] [severity severity-level] [application application] [sequence from-seq [to-
seq]] [count count] [router router-instance [expression]] [message message [regular-
expression]] [subject subject [regexp]] [ascending | descending] [message format
[msg-regexp]]
Context show>log
Description This command displays an event log summary with settings and statistics or the contents of
a specific log file, SNMP log, or memory log.
If the command is specified with no command line options, a summary of the defined system logs is
displayed. The summary includes log settings and statistics.
If the log ID of a memory, SNMP, or file event log is specified, the command displays the contents of
the log. Additional command line options control what and how the contents are displayed.
Contents of logs with console, session or syslog destinations cannot be displayed. The actual events
can only be viewed on the receiving syslog or console device.
Parameters log-id — Displays the contents of the specified file log or memory log ID. The log ID must have a
destination of an SNMP or file log or a memory log for this parameter to be used.
Default Displays the event log summary
Values 1 — 99
severity severity-level — Displays only events with the specified and higher severity.
Default All severity levels
Values cleared, indeterminate, critical, major, minor, warning
To Next Page
Loading...
