CLI Usage
Basic System Configuration Guide 113
repeat repeat — Configures how many times the command is repeated.
Default 10
Values 1 to 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
processing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed.
subscriber
Syntax subscriber sub-ident-string [interval seconds] [repeat repeat] [absolute | rate] sap sap-id
sla-profile sla-profile-name
Context monitor>qos>scheduler-stats
Description This command monitors scheduler statistics for an SLA profile.
Parameters subscriber sub-ident-string — Specifies an existing subscriber a identification policy name.
interval seconds — Configures the interval for each display in seconds.
Default 11 seconds
Values 11 to 60
repeat repeat — Configures how many times the command is repeated.
Default 10
Values 1 to 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
processing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed.
sap sap-id — Specify the physical port identifier portion of the SAP definition.
sla-profile sla-profile-name — Specifies the SLA profile belonging to the subscriber host.
router
Syntax router router-instance
Context monitor
Description This command enables the context to configure criteria to monitor statistical information for a variety
of routing protocols.
To Next Page
Loading...
