Show, Clear, Debug, and Tools Command Reference
504 Basic System Configuration Guide
Sample Output
A:subscr_mgt# show redundancy multi-chassis mc-lag peer 10.10.10.30
===============================================================================
Multi-Chassis MC-Lag Peer 10.10.10.30
===============================================================================
Last Changed : 01/23/2007 18:20:13
Admin State : Up Oper State : Up
KeepAlive : 10 deci-seconds Hold On Ngbr Failure : 3
-------------------------------------------------------------------------------
Lag Id Lacp Key Remote Lag Id System Id Sys Prio Last Changed
-------------------------------------------------------------------------------
1 1 1 00:00:00:00:00:01 1 01/23/2007 18:20:13
2 2 2 00:00:00:00:00:02 2 01/24/2007 08:53:48
-------------------------------------------------------------------------------
Number of LAGs : 2
===============================================================================
A:subscr_mgt#
A:subscr_mgt# show redundancy multi-chassis mc-lag peer 10.10.10.30 lag 1
===============================================================================
Multi-Chassis MC-Lag Peer 10.10.10.30
===============================================================================
Last Changed : 01/23/2007 18:20:13
Admin State : Up Oper State : Up
KeepAlive : 10 deci-seconds Hold On Ngbr Failure : 3
-------------------------------------------------------------------------------
Lag Id Lacp Key Remote Lag Id System Id Sys Prio Last Changed
-------------------------------------------------------------------------------
1 1 1 00:00:00:00:00:01 1 01/23/2007 18:20:13
-------------------------------------------------------------------------------
Number of LAGs : 1
===============================================================================
A:subscr_mgt#
Table 57: Redundancy Multi-chassis MC-Lag Peer Field Descriptions
Label Description
Last Changed Displays date and time of the last mc-lag peer.
Admin State Displays the administrative state of the mc-lag peer.
Oper State Displays the operation state of the mc-lag peer.
KeepAlive Displays the length of time to keep alive the mg-lag peer.
Hold On Ngbr Failure Specifies how many “keepalive” intervals the standby SR will wait for
packets from the active node before assuming a redundant-neighbor node
failure.
To Next Page
Loading...
