110 Rockwell Automation Publication 1756-UM535D-EN-P - November 2012
Chapter 6 Configure the Redundancy Modules
The Module Configuration dialog box opens.
4. Right-click the title bar and choose About.
The About dialog box opens and indicates the RMCT version.
Update the RMCT Version
The RMCT version that is compatible with your redundancy module firmware is
packaged with the redundancy system firmware bundle. To launch the
installation of the RMCT, open the folder that contains the redundancy
firmware revision and double-click the executable file titled
Redundancy_Module_CT.exe.
The RMCT Installation Wizard opens and prompts you with the steps required
to install the RMCT.
To Next Page
Loading...