50 Rockwell Automation Publication 1756-UM535D-EN-P - November 2012
Chapter 2 Design an Enhanced Redundancy System
Optional Software
Software in addition to that listed as required software can be needed depending
on your enhanced redundancy system program, configuration, and components.
Optional software you might need is listed in this table.
If using Then use this software
ControlNet network RSNetWorx™ for ControlNet™
EtherNet/IP network RSNetWorx™ for EtherNet/IP
Alarms FactoryTalk Alarms and Events
Batches or recipes FactoryTalk Batch
HMI
(1)
(1) See Using HMI on page 46 for additional information.
• FactoryTalk View Site Edition
• RSLinx Enterprise software
• RSView32
Various FactoryTalk services FactoryTalk Services Platform
To Next Page
Loading...