14 Rockwell Automation Publication 1756-UM535D-EN-P - November 2012
Preface
The following publications provide specific information about communication
module connections.
You can view or download publications at http://
www.rockwellautomation.com/literature/. To order paper copies of technical
documentation, contact your local Allen-Bradley® distributor or Rockwell
Automation sales representative.
Table 3 - Additional Documentation
Resources Description
1756 Communication Modules Specifications Technical Data, publication 1756-TD003
Describes Ethernet communication module specifications.
ControlNet Modules in Logix5000 Control Systems User Manual, publication CNET-UM001
Describes ControlNet modules and how to use ControlNet modules with a Logix5000
controller.
EtherNet/IP Modules in Logix5000 Control Systems, publication
ENET-UM001
Describes how to use EtherNet/IP communication modules with your Logix5000
controller and communicate with various devices on the Ethernet network.
Ethernet Design Considerations for Control System Networks, publication ENET-SO001 Provides fundamental best-practice guidelines for designing the Ethernet
infrastructure for your Supervisory Controls and Data Acquisition (SCADA) and MES
(Manufacturing Execution Systems) systems with Rockwell Automation software and
hardware products.
EtherNet/IP Embedded Switch Technology Application Guide, publication ENET-AP005
Describes how to configure and implement a device-level ring topology.
EtherNet/IP Socket Interface Application Technique, publication ENET-AT002
Describes the socket interface used to program
MSG instructions to communicate between a Logix5000 controller via an
EtherNet/IP module and Ethernet devices that do not support the EtherNet/IP
application protocol, such as bar code scanners, RFID readers, or other standard
Ethernet devices.
To Next Page
Loading...