EasyManuals Logo

Allen-Bradley Dynamix 2500 User Manual

Allen-Bradley Dynamix 2500
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10 Rockwell Automation Publication 1441-UM001B-EN-P - September 2012
Preface
Dynamix 2500 Data
Collector and the Emonitor
Software
The terminology in the data collector and the software differ in several ways.
This table illustrates the differences.
Software Compatibilities
The Dynamix 2500 data collector requires the following software versions.
USB Driver and Communication Software
USB communication with Microsoft Windows 2000 and Windows XP is
supported using Microsoft ActiveSync software version 4.5 or greater
USB communication with Microsoft Windows 7 is supported using
Microsoft Mobile Device Center
Microsoft Windows 7 32 bit and/or Microsoft Windows 7 64 bit are
supported
Operating System
Microsoft Windows 2000 (SP4) with ActiveSync software
Microsoft Windows XP (SP3) with ActiveSync software
Microsoft Windows 7 with Mobile Device Center software installed
Document Conventions
These are document conventions used in this manual.
The Dynamix 2500 data collector is referred to as a data collector and an
instrument in this manual.
The different versions of the Emonitor software are Enterprise, Factory,
and Workstation. These are all are referred to as the Emonitor software in
this manual.
The Emonitor software screen captures are from version 3.4 and reference
the Enpac 2500 data collector. The next version of the Emonitor software
and this manual will reflect the name Dynamix 2500 data collector.
Table 1 Terminology Differences
Dynamix 2500 Terminology Emonitor Terminology
Offroute
Measurements that are taken but are not
downloaded on to the instrument from Emonitor.
These measurements can be upload to Emonitor.
Unscheduled measurements
Measurements that are not defined in the list of
measurements downloaded by Emonitor.
These measurements are unscheduled.
Route
The Dynamix 2500 data collector uses the term
route’ to refer to a list loaded in the data
collector.
List
The Emonitor software uses the term ‘list’ for an
ordered set of measurement definitions.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allen-Bradley Dynamix 2500 and is the answer not in the manual?

Allen-Bradley Dynamix 2500 Specifications

General IconGeneral
BrandAllen-Bradley
ModelDynamix 2500
CategoryData Loggers
LanguageEnglish

Related product manuals