164 Rockwell Automation Publication 1441-UM001B-EN-P - September 2012
Chapter 5 Collecting and Reviewing Data
Review Data
The Review Data screen lets you view the four types of measurements.
• Spectrum
• Time waveform
• Magnitude and phase orders
• Overall value
Follow these steps to the review data.
1. From the Route Manager, select a route and press Enter.
2. Press F1 (Review).
The Review Data screen appears.
3. Press F2 (Next) or F1 (Previous) to move back and forth through the
review data screens.
Current signal
amplitude
Full scale range
Last recorded value
% changed from last
recorded value to the
current reading.
To Next Page
Loading...