Rockwell Automation Publication 1441-UM001B-EN-P - September 2012 65
Chapter
3
Setting Up Measurements
This chapter describes setting up the measurement definitions in the Emonitor
software, how alarms are handled, lists, and inspection codes.
Measurement definitions define how to collect and store measurements. You can
create several different types of measurement definitions at each location. The
Emonitor software can then take advantage of the abilities of your data collector
by combining some of the measurement definitions when you load them into the
data collector. By combining measurements, the software can shorten the data
collection time.
Topic Page
Measurement Definition Options 66
Setting Up Collection Specifications 75
Setting Up Measurement Definitions 86
Setting Up Alarms, Lists, and Inspection Codes 104
For complete information on all the Emonitor software features, tasks,
and interface elements, refer to the software’s online help.
To Next Page
Loading...
Need help?
General
