116 Rockwell Automation Publication 1441-UM001B-EN-P - September 2012
Chapter 4 Loading and Unloading
The Data Collector Functions dialog box appears.
3. Click Initialize data collector.
A progress bar appears providing a status of the initialization.
4. Click Close, when initialization is complete.
Now frequency labels will be loaded with your lists.
Loading Inspection Codes
The Emonitor software and the Dynamix support loading inspection codes with
a list. The Dynamix stores inspection codes with a loaded list. You can only load
inspection codes with a list.
Follow these steps to load inspection codes.
1. Select Tools > Load/Unload.
2. Click Load Options.
The Load Options dialog box appears.
3. Check the Load Inspection Codes checkbox.
4. Click OK.
Now inspection codes will be loaded with your lists.
Check to load
inspection codes.
To Next Page
Loading...