122 Rockwell Automation Publication 1441-UM001B-EN-P - September 2012
Chapter 4 Loading and Unloading
Unload Lists in the Emonitor Software
Follow these steps to unload a list.
1. From the Tools menu, choose Load/Unload.
The Load/Unload dialog box appears.
2. Make sure the data collector and the computer are connected.
3. Choose the desired list or lists.
4. In the Load/Unload dialog box, click Unload.
The following series of events occur:
– The Emonitor software unloads the file from the data collector and
shows a progress bar, telling you that it is unloading the file and
updating the database.
– When the unload is complete, the progress bar closes in the Emonitor
software.
5. Click Close.
Unload Multiple Measurements Points in the Emonitor Software
With the Dynamix 2500 data collector, you can collect multiple readings for a
single measurement definition. All of the data for each measurement definition
can be unloaded to the Emonitor software database.
Follow these steps to unload multiple measurement points.
1. In the Load/Unload dialog box, click Unload Options.
To Next Page
Loading...
Need help?
General
