Rockwell Automation Publication 1441-UM001B-EN-P - September 2012 115
Loading and Unloading Chapter 4
See Engineer Mode Menu on page 44 for details on how to initialize memory
using the Dynamix 2500 data collector.
Follow these instructions to automatically initialize the data collector before
loading a list.
1. Choose Tools > Load/Unload.
2. In the Load/Unload dialog box, click Load Options.
The Load Options dialog box appears
.
3. Check the Initialize data collector before loading checkbox.
4. Click OK.
You must have the Dynamix 2500 data collector connected to the computer. You
can also use the unit to initialize memory.
Follow these steps to manually initialize the data collector any time.
1. Choose Tools > Load/Unload.
2. Click DC. Functions in the Load/Unload dialog box.
Initializing the data collector memory erases the existing data. Be
sure that you no longer need the data before deleting it.
Check to
automatically
initialize.
If you are manually initializing the memory card, you must also
have the SD card in the drive.
See Insert and Remove a Storage Card on page 64
.
To Next Page
Loading...
Need help?
General
