EasyManuals Logo

Allen-Bradley MicroLogix 1100 User Manual

Allen-Bradley MicroLogix 1100
256 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #183 background imageLoading...
Page #183 background image
Publication 1763-UM001E-EN-P - June 2015
Replacement Parts 181
Battery Handling
Follow the procedure below to ensure proper battery operation and reduce
personnel hazards.
Use only for the intended operation.
Do not ship or dispose of cells except according to recommended
procedures.
Do not ship on passenger aircraft.
Storage
Store lithium batteries in a cool, dry environment, typically 20 °C...2 5°C
(68°F...77°F) and 40%...60% humidity. Store the batteries and a copy of the
battery instruction sheet in the original container, away from flammable
materials.
Transportation
One or Two Batteries
Each battery contains 0.23 g of lithium. Therefore, up to two batteries can be
shipped together within the United States without restriction. Regulations
governing shipment to or within other countries may differ.
ATTENTION
Do not charge the batteries. An explosion could
result or the cells could overheat causing burns.
Do not open, puncture, crush, or otherwise
mutilate the batteries. A possibility of an
explosion exists and/or toxic, corrosive, and
flammable liquids would be exposed.
Do not incinerate or expose the batteries to high
temperatures. Do not attempt to solder batteries.
An explosion could result.
Do not short positive and negative terminals
together. Excessive heat can build up and cause
severe burns.

Table of Contents

Other manuals for Allen-Bradley MicroLogix 1100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allen-Bradley MicroLogix 1100 and is the answer not in the manual?

Allen-Bradley MicroLogix 1100 Specifications

General IconGeneral
Processor32-bit
Programming SoftwareRSLogix 500
MountingDIN rail or panel mount
Power Supply24V DC
TypeCompact PLC
Digital Inputs12
Digital Outputs8
Analog Inputs4 (depending on model)
Analog OutputsOptional with expansion module
Programming LanguageLadder Logic
Operating Temperature0 to 55 °C (32 to 131 °F)
SeriesMicroLogix

Related product manuals