Allen-Bradley SLC 500 - SLC 500 System Test General Specifications

2–8 Selecting Your Hardware Components
Publication 1747-6.2
SLC 500 System Test General Specifications
The table below lists SLC 500 system test specifications.
Description Specification Industry Standard
atu
Operating: 0 ° C to +60 ° C (+32 °F to +140°F)
Not Applicable
Temper
atu
re
Storage: –40 ° C to +85 ° C (–40 °F to +185°F)
Not Applicable
Humidity
5 to 95% without condensation Not Applicable
Vib ation
Operating: 1.0G at 5 – 2000 Hz Not Applicable
Vib
r
ation
Non-operating: 2.5Gs at 5 – 2000 Hz Not Applicable
Operating: (all modules except relay contact)
30.0Gs (3 pulses, 1 1 ms)
Not Applicable
Shock
Operating: (relay contact modules – OW , IO combo)
10.0Gs (3 pulses, 1 1 ms)
Not Applicable
Non-operating: 50.0Gs (3 pulses, 11 ms) Not Applicable
all ( o t t)
Portable, 2.268 kg (5 lbs) or less at 0.762 m (30 in.)
(six drops)
Not Applicable
Free F
all (
dr
o
p
t
es
t)
Portable, 2.268 kg (5 lbs) or more at 0.1016 m (4 in.)
(three flat drops)
Not Applicable
Showering Arc: 1.5 KV NEMA ICS 2-230/NEMA ICS 3-304
Surge Withstand Capability: 3 KV IEEE Std. 472-1974/ANSI C37.90/90A-1974
Electromagnetic Compatibility
Fast T ransient Burst (impulse): 2KV for 1746 power
supplies, 1KV for 1746 I/O and
communication lines over 10m (32.84 ft),
5 ns rise time
Internal Allen-Bradley standard
➀
Electrostatic Discharge (ESD): 15 KV ,
100 pF/1.5 Kohm model
Internal Allen-Bradley standard
➀
Radiated Electromagnetic Susceptibility: 5W
walkie-talkie at 464.5 MHz and
153.05 MHz
Internal Allen-Bradley standard
➀
Dielectric Withstand: 1500V ac UL 508, CSA C22.2 No. 142
at
Isolation between Communication Circuits: 500V dc Not Applicable
S
a
fe
t
y
Isolation between Backplane and I/Os: 1500V ac Not Applicable
Flammability and Electrical Ignition: UL94V-0 Not Applicable
Certification
UL listed/CSA approved
Class 1, Groups A, B, C or D, Division 2
CE compliant for all applicable directives
Not Applicable
➀
Internal Allen-Bradley standards are based on Allen-Bradley’ s extensive experience in industrial
controls. It is also based partly on industry and/or military specifications.
AB PLCs