Allen-Bradley SLC 500 Installation And Operation Manual

Preface P–3
Publication 1747-6.2
Related Documentation
The table below provides a listing of publications that contain
important information about Allen-Bradley Small Logic Controllers
and their installation and application. You may want to reference
them while you are installing the SLC 500 controller. (To obtain a
copy of one of these publications, contact your local Allen-Bradley
office or distributor.)
For Read This Document
Document
Number
An overview of the SLC 500 family of products SLC 500 System Overview 1747-2.30
A description on how to install and use your Modular SLC 500
programmable controller
Installation & Operation Manual for Modular
Hardware Style Programmable Controllers
1747-6.2
A description on how to install and use your Fixed SLC 500
programmable controller
Installation & Operation Manual for Fixed Hardware
Style Programmable Controllers
1747-6.21
A procedural and reference manual for technical personnel who
use an HHT to develop control applications
Allen-Bradley Hand-Held Terminal User Manual 1747-NP002
An introduction to HHT for first-time users, containing basic
concepts but focusing on simple tasks and exercises, and allowing
the reader to begin programming in the shortest time possible
Getting Started Guide for HHT 1747-NM009
In-depth information on grounding and wiring Allen-Bradley
programmable controllers
Allen-Bradley Programmable Controller Grounding
and Wiring Guidelines
1770-4.1
A description on how to install a PLC-5r system
PLC-5 Family Programmable Controllers Hardware
Installation Manual
1785-6.6.1
A description of important differences between solid-state
programmable controller products and hard-wired
electromechanical devices
Application Considerations for Solid-State Controls SGI-1.1
An article on wire sizes and types for grounding electrical
equipment
National Electrical Code
Published by the
National Fire
Protection
Association of
Boston, MA.
A complete listing of current Allen-Bradley documentation,
including ordering instructions. Also indicates whether the
documents are available on CD-ROM or in multi-languages.
Allen-Bradley Publication Index SD499
A glossary of industrial automation terms and abbreviations Allen-Bradley Industrial Automation Glossary AG-7.1

Allen-Bradley SLC 500 Specifications

General

Programming Software	RSLogix 500
Communication Ports	RS-232, DH-485, DH+
Power Supply	120/240V AC or 24V DC
Programming Languages	Ladder Logic
Operating Temperature	0°C to 60°C (32°F to 140°F)
Relative Humidity	5% to 95% (non-condensing)
Memory	4K to 64K words (depending on the processor)