14 Rockwell Automation Publication 1560F-UM001A-EN-P - June 2019
Chapter 1 Product Overview
1562F – Combination Controller
A medium voltage solid-state controller that provides isolation and protection
for new installations. It includes:
• Tin-plated, copper, horizontal power bus (optional)
• A continuous, bare copper ground bus
• Power electronics
• A main non-load-break isolating switch and operating handle
• An isolation vacuum contactor
• A bypass vacuum contactor
• Three current limiting power fuses for NEMA Class E2 operation
•Three current transformers
• A control power transformer (optional)
• A low voltage control panel complete with microprocessor-based control
module
• Space for necessary auxiliary control and metering devices
• Top and bottom plates to accommodate power cables
• Motor overload protection (included in SMC-50 control module) -
available in Arc Resistant enclosures
SMC-50™ Control Module
The SMC-50 control module offers a full range of starting and stopping modes
as standard:
• Soft Start with Selectable Kickstart
• Soft Stop
• Current Limit Start with Selectable Kickstart
• Sensorless Linear Acceleration
• Sensorless Linear Deceleration
• Pump Conrol (Start and Stop Control modes)
•Torque Control Start
• Dual Ramp Start
• Full Voltage Start (Emergency Run)
Other features that offer further user benefit include:
• Extensive protection and diagnostic features
•Metering
• Communication capability
•I/O
These modes, features and options are further described in this chapter.
To Next Page
Loading...
Need help?
General
