Rockwell Automation Publication 1560F-UM001A-EN-P - June 2019 87
Programming Chapter 4
3. Select the PARAM ACCESS LEVEL option, then press the Enter (#5)
key. The Dev Parameter screen appears.
4. Use the up or down arrow to scroll up or down until you reach the desired
access level
5. Press Enter (#5) to view that access level.
Parameter Management
Before you begin programming, it is important to understand how the memory is
structured within the SMC-50 and used on power-up and during normal
operation.
Figure 43 - Memory Block Diagram
Linear List
File-Group
Changed Parameters
Param Access Level
AUTO
F
00
Stopped
0 Amps
Allen-Bradley
ESC
DEV PARAM
SMC-50 Control Module Memory
ROM
RAM
EEPROM
20-HIM-A6
Network
Connection
PC Software
To Next Page
Loading...
